REAR COMBINATION LIGHT ASSEMBLY(for VELLFIRE) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH


    1. Connect the connector.

    2. B006LJKC01
      B006N8A Slide in this Direction
      B006PCE Protective Tape

      Slide the rear combination light assembly LH towards the vehicle front to attach the pin and guide.

    3. Install the 2 screws.