REAR COMBINATION LIGHT ASSEMBLY(for VELLFIRE) DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. B006L76C01
      *a Matchmark
      *b Unlock Position Mark
      B006N8A Counterclockwise

      Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.

    2. B006NN5C01
      B006N8A Remove in this Direction

      Remove the rear turn signal light bulb from the bulb socket.

  2. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH


    1. B006PQL

      Disconnect the connector.

    2. Detach the wire harness clamp and remove the rear combination light socket and wire sub-assembly LH.