REAR COMBINATION LIGHT ASSEMBLY(for ALPHARD) INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH


    1. B006LE8C02
      *a

      Component without harness connected

      (Rear Combination Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → 7 (TL)

      Battery negative (-) → 4 (E)

      		 Taillight illuminates

      Battery positive (+) → 6 (STP)

      Battery negative (-) → 4 (E)

      		 Stop light illuminates

      Battery positive (+) → 1 (TRN)

      Battery negative (-) → 4 (E)

      Turn signal light illuminates*A

      Battery positive (+) → 1 (TRN)

      Battery positive (+) → 2 (TRN2)

      Battery negative (-) → 4 (E)

      Turn signal light illuminates*B

      *A: w/o Sequential Turn Signal Light
      *B: w/ Sequential Turn Signal Light
      If the result is not as specified, replace the rear combination light assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH


    1. B006LE8C02
      *a

      Component without harness connected

      (Rear Combination Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → 7 (TL)

      Battery negative (-) → 4 (E)

      		 Taillight illuminates

      Battery positive (+) → 6 (STP)

      Battery negative (-) → 4 (E)

      		 Stop light illuminates

      Battery positive (+) → 1 (TRN)

      Battery negative (-) → 4 (E)

      Turn signal light illuminates*A

      Battery positive (+) → 1 (TRN)

      Battery positive (+) → 2 (TRN2)

      Battery negative (-) → 4 (E)

      Turn signal light illuminates*B

      *A: w/o Sequential Turn Signal Light
      *B: w/ Sequential Turn Signal Light
      If the result is not as specified, replace the rear combination light assembly RH.