REAR COMBINATION LIGHT ASSEMBLY(for ALPHARD) INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH


    1. A01IFGUC01
      *a

      Component without harness connected

      (Rear Combination Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → K8-1 (TL)

      Battery negative (-) → K8-3 (E)

      		 Taillight illuminates

      Battery positive (+) → K8-2 (STP)

      Battery negative (-) → K8-3 (E)

      		 Stop light illuminates

      If the result is not as specified, replace the rear combination light assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH


    1. A01IFGUC02
      *a

      Component without harness connected

      (Rear Combination Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → L12-1 (TL)

      Battery negative (-) → L12-3 (E)

      		 Taillight illuminates

      Battery positive (+) → L12-2 (STP)

      Battery negative (-) → L12-3 (E)

      		 Stop light illuminates

      If the result is not as specified, replace the rear combination light assembly RH.