REAR COMBINATION LIGHT ASSEMBLY(for ALPHARD) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH


    1. B006Q7Q

      Remove the 2 screws.

    2. B006NUAC01
      B006Q1Z Place Hands Here
      B006N8A Slide in this Direction
      B006PCE Protective Tape

      Apply protective tape around the rear combination light assembly LH.

    3. Place your hand at the location shown in the illustration and pull the rear combination light assembly LH toward the rear of the vehicle to detach the pin and guide to remove it.

      Note

      Pull the rear combination light assembly LH straight towards the rear of the vehicle to prevent the guide from becoming damaged.

    4. B006QWB

      Disconnect the connector.