SIDE TURN SIGNAL LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE OUTER MIRROR LH

    Click here

  2. REMOVE OUTER MIRROR COVER LH

    Click here

  3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. B006MIX

      Remove the 2 screws.

    2. B006KY3

      Detach the claw and remove the under cover.

    3. B006KV0

      Detach the wire harness clamp and connector.

    4. B006QA1C01
      B006N8A Removal in this Direction

      Detach the claw and remove the side turn signal light assembly LH.