FRONT TURN SIGNAL LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT TURN SIGNAL LIGHT BULB (for ALPHARD)


    1. B006RHIC01
      *a Matchmark
      *b Unlock Position Mark
      B006N8A Counterclockwise

      Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.

    2. B006RHRC01
      B006N8A Remove in this Direction

      Remove the front turn signal light bulb from the bulb socket.

  2. REMOVE FRONT TURN SIGNAL LIGHT BULB (for VELLFIRE)


    1. B006M9UC02
      *a Matchmark
      *b Unlock Position Mark
      B006N8A Counterclockwise

      Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.

    2. B006RHRC01
      B006N8A Remove in this Direction

      Remove the front turn signal light bulb from the bulb socket.

  3. INSTALL FRONT TURN SIGNAL LIGHT BULB (for ALPHARD)


    1. Install the front turn signal light bulb to the bulb socket.

    2. B006LO3C01
      *a Matchmark
      *b Unlock Position Mark
      *c Lock Position Mark
      B006N8A Clockwise

      Align the matchmark of the bulb socket to the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.

  4. INSTALL FRONT TURN SIGNAL LIGHT BULB (for VELLFIRE)


    1. Install the front turn signal light bulb to the bulb socket.

    2. B006PO1C01
      *a Matchmark
      *b Unlock Position Mark
      *c Lock Position Mark
      B006N8A Clockwise

      Align the matchmark of the bulb socket to the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.