REAR LIGHT ASSEMBLY(for VELLFIRE) INSPECTION

PROCEDURE


  1. INSPECT REAR LIGHT ASSEMBLY LH


    1. A01UETWC01
      *a

      Component without harness connected

      (Rear Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → U12-3 (TL)

      Battery negative (-) → U12-2 (E)

      		 Taillight illuminates

      Battery positive (+) → U12-1 (B)

      Battery negative (-) → U12-2 (E)

      		 Rear Fog Light illuminates*

      *: w/ Rear Fog Light

      If the result is not as specified, replace the rear light assembly LH.

  2. INSPECT REAR LIGHT ASSEMBLY RH


    1. A01UETWC02
      *a

      Component without harness connected

      (Rear Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → U4-3 (TL)

      Battery negative (-) → U4-2 (E)

      		 Taillight illuminates

      Battery positive (+) → U4-1 (B)

      Battery negative (-) → U4-2 (E)

      		 Rear Fog Light illuminates*

      *: w/ Rear Fog Light

      If the result is not as specified, replace the rear light assembly RH.