REAR LIGHT ASSEMBLY(for VELLFIRE) DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR LIGHT GASKET LH


    1. B006LX3

      Remove the rear light gasket LH.

      Note

      The rear light gasket LH cannot be reused.

  2. REMOVE REAR LIGHT LED


    1. B006RC1

      Disconnect the connector.

    2. B006NSKC01
      B006N8A Counterclockwise

      Rotate the rear combination light LED counterclockwise until it stops, and then remove it.

  3. REMOVE REAR LIGHT SOCKET AND WIRE LH


    1. B006MKX

      Disconnect the connector.

    2. B006PEGC01
      B006PCE Protective Tape
      B006N8A Remove in this Direction

      Using a driver, detach the claw and disconnect the connector.

      Tech Tips

      Tape the screwdriver tip before use.