FOG LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FOG LIGHT BULB


    1. B006QLX

      Remove the 4 clips.

    2. B006P0K

      Disconnect the front fender splash shield sub-assembly LH as shown in the illustration.

    3. B006QPS

      Disconnect the connector.

    4. B006NZZ

      Turn the fog light bulb in the direction indicated by the arrow in the illustration to remove it.

      Note

      Do not touch the glass part of the fog light bulb.

  2. INSTALL FOG LIGHT BULB


    1. B006LT9

      Set the fog light bulb in place.

      Note

      Do not touch the glass part of the fog light bulb.

    2. Turn the fog light bulb in the direction indicated by the arrow in the illustration to install it.

    3. Connect the connector.

    4. B006QZ7

      Connect the front fender splash shield sub-assembly LH as shown in the illustration.

    5. Install the 4 clips.