AUTOMATIC HIGH BEAM SYSTEM PRECAUTION


  1. PRECAUTION FOR AUTOMATIC HIGH BEAM SYSTEM


    1. Windshield Replacement Precautions

      The timing of the high beams turning on and off differs depending on the light transmission rate of the glass. For this reason, when replacing the windshield, replace it with an original equipment part.

    2. Inner Rear View Mirror Assembly Handling Precautions

      Failure to observe the following precautions may result in a malfunction:


      • Do not touch the lens of the inner rear view mirror assembly with bare hands.


      • Do not allow anything to adhere to the inner rear view mirror assembly lens.


      • Do not apply strong impacts to the inner rear view mirror assembly.


      • Do not allow any liquid to contact the inner rear view mirror assembly.