AUTOMATIC HIGH BEAM SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Trouble Codes.


      Body Electrical > Main Body > Trouble Codes

    5. Enter the following menus: Body Electrical / HL Autoleveling / Trouble Codes.


      Body Electrical > HL AutoLeveling > Trouble Codes

    6. Enter the following menus: Body Electrical / Automatic Hight Beam / Trouble Codes.


      Body Electrical > Automatic High Beam > Trouble Codes

    7. Check for DTCs.

  2. CLEAR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Trouble Codes.


      Body Electrical > Main Body > Clear DTCs

    5. Enter the following menus: Body Electrical / HL Autoleveling / Trouble Codes.


      Body Electrical > HL AutoLeveling > Clear DTCs

    6. Enter the following menus: Body Electrical / Automatic Hight Beam / Trouble Codes.


      Body Electrical > Automatic High Beam > Clear DTCs

    7. Clear the DTCs.