| DTC Code | DTC Name |
|---|---|
| B2456 | Left Headlight ECU Variation Error |
DESCRIPTION
This DTC is output when a headlight light control ECU sub-assembly LH (main) that is incompatible with the vehicle is installed.
The headlight light control ECU sub-assembly LH (main) outputs DTC B2456.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B2456 | Left Headlight ECU Variation Error | Headlight light control ECU sub-assembly LH (main) variation mismatch |
|
CAUTION / NOTICE / HINT
Note
After the headlight light control ECU sub-assembly LH (main) is replaced, vehicle information registration and initialization are necessary.
As the door control battery is installed between the vehicle battery and main body ECU (multiplex network body ECU), first perform the inspections in On-Vehicle Inspection to confirm that there are no malfunctions in the power source circuit for the main body ECU (multiplex network body ECU) before performing this troubleshooting procedure.
PROCEDURE
CLEAR DTC
Clear the DTCs.
| Result | ||
|---|---|---|
|
| NEXT |
|
CHECK FOR DTC
Turn the engine switch on (IG).
Turn on the headlights using the headlight dimmer switch.
Check for DTCs.
| Result | |||
|---|---|---|---|
|
| DTC B2456 output does not occur |
|
USE SIMULATION METHOD TO CHECK Click here |
| DTC B2456 output occurs |
|
CHECK ECM
Check that the ECM part number matches the vehicle.
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| B |
|
REPLACE ECM Click here |
| C |
|
REPLACE ECM Click here |
| A |
|
CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
Check that the main body ECU (multiplex network body ECU) part number matches the vehicle.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| A |
|
REPLACE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH (MAIN) Click here |
| B |
|
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here |