WASHER NOZZLE(for Rear Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT REAR WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine switch turned on (IG), check the position that the washer fluid hits the rear window.

      OK
      Washer fluid hits the rear window in the areas shown in the illustration.
      A01IJW5C01
      *a Upper Limit *b Standard
      *c Lower Limit - -
      Standard
      Area Measurement Area Measurement
      A 69.6 mm (2.7402 in.) B 59.8 mm (2.3543 in.)
      C 94.5 mm (3.7205 in.) D 289.7 mm (11.4055 in.)
      E 76.4 mm (3.0079 in.) F 191.2 mm (7.5275 in.)
      G 132.3 mm (5.2087 in.) H 35.7 mm (1.4055 in.)

      Note

      If the result is not as specified, adjust the rear washer nozzle.

      Click here