WASHER NOZZLE ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine switch turned on (IG), check the position that the washer fluid hits the windshield.

      OK
      Washer fluid hits the windshield in the areas shown in the illustration.
      A01IFLYC02
      *a Upper Limit *b Standard
      *c Lower Limit - -
      Standard
      Area Measurement Area Measurement
      A 644 mm (25.3543 in.) B 87 mm (3.4252 in.)
      C 210 mm (8.2677 in.) - -

      Note

      If the result is not as specified, replace the washer nozzle sub-assembly.