REAR WIPER RUBBER REMOVAL

PROCEDURE


  1. REMOVE REAR WIPER BLADE


    1. Turn the engine switch on (IG).

    2. A01IGIQC01
      *a 42 °
      *b 19 °

      Operate the rear wiper switch and turn the engine switch off to stop the rear wiper arm and blade assembly when it comes to the position shown in the illustration.

    3. A01IL1HC01
      B006N8A Move

      Move the rear wiper arm and blade.

    4. A01IKNAC01
      B006N8A Move

      Move the rear wiper blade until a "click" sound can be heard and the claw detaches.

      Note

      Do not damage the claw.

    5. A01IJ8TC01
      B006N8A Remove in this Direction

      Remove the rear wiper blade as shown in the illustration.

      Note

      Place a cloth, etc., between the back door glass and rear wiper arm to prevent damage to the back door glass.

  2. REMOVE REAR WIPER RUBBER


    1. Pull out the rear wiper rubber together with the 2 rear wiper rubber backing plates from the rear end of the rear wiper blade stopper as shown in the illustration.

      A01IK54C01
      B006QOD Push B006LKF Pull Out
      B006N8A Remove in this Direction (1) B006NJK Remove in this Direction (2)

      Note

      Do not use excessive force when pulling out the rear wiper rubber in order to prevent deformation of the rear wiper rubber backing plate and damage to the rear wiper blade claw.

      Tech Tips

      Lightly pressing (gripping) the center of the rear wiper blade can make it easier to lift up and pull out the rear wiper rubber.

    2. A01IIXCC01
      B006N8A Remove in this Direction

      Remove the 2 rear wiper rubber backing plates from the rear wiper rubber.