FRONT WIPER RUBBER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL WIPER RUBBER LH

    Tech Tips

    The wiper rubber can be installed from either end of the front wiper blade LH.


    1. B006QPLC01
      *a Slit
      B006N8A Install in this Direction

      Insert the wiper rubber through the slit in the front wiper blade as shown in the illustration.

    2. Gradually compress the wiper rubber LH from the rear end in the order (1, 2, 3 and 4) to slide the end of the wiper rubber LH until it reaches the slit of the front wiper plate LH and insert it into the slit.

      B006REPC03
      *a Slit - -

      Note

      Make sure that the wiper rubber LH is fitted securely into the cap and cannot be removed.

    3. B006NLY

      Slide the wiper rubber in the direction indicated by the arrow shown in the illustration to install it.

      Tech Tips

      Check that the wiper rubber LH extends to the tip of both ends of the cap.

  2. INSTALL FRONT WIPER BLADE LH


    1. Align the protrusion of the front wiper arm LH with the indentation of the front wiper blade LH and lower the front wiper arm LH.

      B006MR1C01
      *a Front Wiper Arm Protrusion *b Front Wiper Blade Indentation
      *c Lock Button - -
      B006N8A Install in this Direction (1) B006NJK Install in this Direction (2)

    2. Slide the front wiper blade LH until the lock button is locked to install the front wiper blade LH.

      Note

      Make sure that the lock button locks so that it is installed securely.