REAR WIPER MOTOR ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT REAR WIPER MOTOR ASSEMBLY


    1. A01IHXNC02
      *a Ceramic Dot
      *b 7 mm (0.2756 in.)
      *c 17 mm (0.6693 in.)

      Check the automatic stop (park) position.


      1. Operate the rear wiper motor assembly, and then stop the operation. Check the wiper arm automatic stop (park) position.

        OK
        Rear wiper arm stops at the position shown in the illustration.

        Tech Tips

        After the wiper arm stops, lift it up 2 times and check the automatic stop (park) position.