FRONT WIPER MOTOR(for RHD) INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Make sure that fingers or articles of clothing do not get caught in moving parts when performing this test.

PROCEDURE


  1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY

    A01IKGHC14
    *a Component without harness connected (Windshield Wiper Motor Assembly)

    1. Check the LO operation.


      1. Apply battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 5 (+1)

        Battery negative (-) → Terminal 4 (E)

        		 Motor operates at low speed

        If the result is not as specified, replace the windshield wiper motor assembly.

    2. Check the HI operation.


      1. Apply battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 3 (+2)

        Battery negative (-) → Terminal 4 (E)

        		 Motor operates at high speed

        If the result is not as specified, replace the windshield wiper motor assembly.