LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (EXT)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS.


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Utility / Customize / Light Control.

      5. Select the setting by referring to the table below.


        Light Control
        Tester Display Description Default Setting ECU
        Response Time Changes the delay timing of lighting the taillights when going into a tunnel when the headlight dimmer switch (light control switch) is in the AUTO position. Normal 0:Normal,1:Long Main body ECU (Multiplex network body ECU)
        Disp Ex ON Sen Sets the display light (meter, audio, etc.) dim starting level.*A NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main body ECU (Multiplex network body ECU)
        Disp Ex OFF Sen Sets the display light (meter, audio, etc.) dim return level.*B NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main body ECU (Multiplex network body ECU)
        Sensitivity Adjusts the ambient light sensitivity of the automatic light control system.*C Normal 000:Normal,001:Dark2,010:Dark1,011:Light1,100:Light2 Main body ECU (Multiplex network body ECU)
        Follow Me Home Lighting Time Changes the low beam headlight lighting time when engine switch is off and headlight dimmer switch is pulled to flash headlights once. (w/o Dimmer Switch OFF Position) 30 s 00:30 s,01:60 s,10:90 s,11:120 s Main body ECU (Multiplex network body ECU)
        Light up Clearance Lights at Door Unlock Function Turns on the clearance lights and the taillights for 15 seconds when the doors are unlocked by the smart key or wireless key. ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *A

        B006NESE04

        Tech Tips

        When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.

        *B

        B006NESE04

        Tech Tips

        When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.

        *C

        B006NESE06

        Tech Tips

        When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.

  2. Customizing with Multi-display.


    1. Customizing with Multi-display.


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Edit /settings / Vehicle settings / Vehicle Customization / Light settings.

      3. Select the setting by referring to the table below.

        Light settings
        Display Default Content Setting Relevant ECU
        Light Sensor Sensitivity 0 (middle bar) Adjusts the ambient light sensitivity of the automatic light control system.*A -2, -1, 0, +1 or +2 Main body ECU (Multiplex network body ECU)

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *A

        B006NESE05
        *a System Setting
        *b Dark
        *c Light
        *d Setting

        Tech Tips

        When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.