PRECAUTION OF WASHER NOZZLE ADJUSTMENT
Do not clean or adjust the washer nozzle with a safety pin, etc. for the following reasons:
The washer nozzle tip is made of resin and could be damaged.
Adjustment is not necessary for this spray-type washer nozzle. If it is necessary to change the nozzle angle, replace the washer nozzle with one that has a different nozzle angle.
for Front Side:
for Rear Side:
If the washer nozzle is clogged with wax, etc., bring the vehicle to the workshop.
PRECAUTION OF RAIN SENSOR (w/ Rain Sensor)
If a water repellent coating is applied to the windshield glass, the rain sensor cannot properly detect the amount of rain and the rain sensing wipers may not operate properly.
When it is not raining, the engine switch is on (IG) and the wipers are in AUTO, the rain sensor may react and the wipers may operate when the rain sensor detection area on the windshield is touched by hand, or when a wet cloth or other material that contains water is close. This may lead to injury or damage to the wipers or other objects. Also, if the rain sensor or a part nearby (windshield, rain sensor cover, etc.) is vibrated, the rain sensor may react and the wipers may operate.
The rain sensing sensor determines the amount of rain. As the rain sensor uses an optical sensor, when the windshield is continuously in direct sunlight in the morning or evening or the windshield is dirty due to bugs, etc., the system may not operate properly.