OUTER REAR VIEW MIRROR GLASS REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE OUTER MIRROR LH


    1. A01IJ0KC01
      B006PCE Protective Tape
      B006QOD Push

      Push the lower part of the mirror surface and tilt it.

    2. Put protective tape as shown in the illustration.

    3. A01II7GC01
      B006PCE Protective Tape
      B006QOD Push

      Push the upper part of the mirror surface and tilt it.

    4. Put protective tape as shown in the illustration.

    5. A01IKS8C01
      B006QOD Push
      B006N8A Remove in this Direction

      Using moulding remover D, detach the claw of the outer mirror LH as shown in the illustration.

    6. Push the lower part of the mirror surface and tilt it.

      Tech Tips

      The claw will be attached again if the mirror surface is pushed with excessive force.

    7. A01IH0LC01
      B006QOD Push
      B006N8A Remove in this Direction

      Using moulding remover D, detach the claw of the outer mirror LH as shown in the illustration.

    8. w/o Mirror Heater:


      1. Remove the outer mirror LH.

    9. w/ Mirror Heater:


      1. A01IJI3

        Disconnect the connector and remove the outer mirror LH.