OUTER REAR VIEW MIRROR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH


    1. B006O9IC01
      B006N8A Install in this Direction

      Attach the claw and temporarily install the outer rear view mirror assembly LH.

    2. B006QO6

      Install the outer rear view mirror assembly LH with the 3 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    3. B006QAC

      Connect the connector.

  2. INSTALL OUTER MIRROR INSTALL HOLE COVER LH


    1. B006PFU

      Attach the claw and install the outer mirror install hole cover LH.

  3. INSTALL OUTER MIRROR PROTECTOR

    Click here

  4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  5. INSTALL FRONT ARMREST ASSEMBLY LH

    Click here

  6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  7. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  8. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

  9. INSTALL LOWER DOOR FRAME GARNISH LH

    Click here

  10. INSPECT POWER MIRROR CONTROL SYSTEM

    Click here