DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
According to the display on the GTS, read the Data List.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Mirror Selection SW (R) | Mirror select switch signal for RH mirror | OFF or ON | OFF: Mirror select switch in the neutral position (off) ON: Mirror select switch in the R position |
Only item displayed (not supported) |
| Mirror Selection SW (L) | Mirror select switch signal for LH mirror | OFF or ON | OFF: Mirror select switch in the neutral position (off) ON: Mirror select switch in the L position |
Only item displayed (not supported) |
| Mirror Position SW (R) | Mirror surface adjust switch signal (Right) | OFF or ON | OFF: Mirror surface adjust switch not pressed right ON: Mirror surface adjust switch pressed right |
Only item displayed (not supported) |
| Mirror Position SW (L) | Mirror surface adjust switch signal (Left) | OFF or ON | OFF: Mirror surface adjust switch not pressed left ON: Mirror surface adjust switch pressed left |
Only item displayed (not supported) |
| Mirror Position SW (Up) | Mirror surface adjust switch signal (Up) | OFF or ON | OFF: Mirror surface adjust switch not pressed up ON: Mirror surface adjust switch pressed up |
Only item displayed (not supported) |
| Mirror Position SW (Dwn) | Mirror surface adjust switch signal (Down) | OFF or ON | OFF: Mirror surface adjust switch not pressed down ON: Mirror surface adjust switch pressed down |
Only item displayed (not supported) |
| Outer Mirror Fold SW | Mirror retract switch signal | OFF or ON | OFF: Mirror retract switch not in retract position ON: Mirror retract switch in retract position |
- |
| Auto Mirror SW | Mirror retract switch signal | OFF or ON | OFF: Mirror retract switch not in auto position ON: Mirror retract switch in auto position |
- |
| Auto Fold Mirror | Function that changes the condition under which the outer mirrors automatically retract | ACC, Door Lock or OFF | Customized setting displayed | - |
| Reverse Coupled Actuation Mirror Angle | Function that turns the reverse shift-linked mirror position memorization function on or off | Default Setting or User Setting | Customized setting displayed | Only item displayed (not supported) |
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Active Test.
According to the display on the GTS, perform the Active Test.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Mirror Fold | Mirror retract operation | OFF or ON | - |
| Mirror Return | Mirror return operation | OFF or ON | - |