FUEL LID LOCK CONTROL CABLE ASSEMBLY(for RHD) REMOVAL

PROCEDURE

1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

   
   

   1. for Manual Captain Seat:

      Click here

   2. for Power Captain Seat with Memory:

      Click here

   3. for Power Captain Seat without Memory:

      Click here

2. REMOVE REAR NO. 1 SEAT ASSEMBLY RH

   Tech Tips

   Use the same procedure described for the LH side.

3. REMOVE COWL SIDE TRIM BOARD RH

   Click here

4. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

   Click here

5. REMOVE REAR DOOR SCUFF PLATE RH

   Click here

6. REMOVE ASSIST GRIP PLUG

   Click here

7. REMOVE ASSIST GRIP PLUG

   Click here

8. REMOVE NO. 1 ASSIST GRIP

   Click here

9. REMOVE OUTER LAP BELT ANCHOR COVER

   Click here

10. REMOVE LOWER CENTER PILLAR GARNISH RH

    Click here

11. REMOVE REAR NO. 2 SEAT ASSEMBLY LH

    Click here

12. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

13. REMOVE REAR NO. 1 FLOOR BOARD ASSEMBLY

    Click here

14. REMOVE REAR NO. 2 FLOOR BOARD ASSEMBLY

    Click here

15. REMOVE REAR NO. 3 FLOOR BOARD ASSEMBLY

    Click here

16. REMOVE UTILITY BOX SUB-ASSEMBLY

    Click here

17. REMOVE BACK DOOR STRIKER COVER

    Click here

18. REMOVE BACK DOOR SCUFF PLATE

    Click here

19. REMOVE REAR UPPER NO. 2 FLOOR BOARD PLATE

    Click here

20. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

21. REMOVE ROPE HOOK ASSEMBLY

    Click here

22. REMOVE DECK SIDE GARNISH LH

    Click here

23. REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH

    Click here

24. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

25. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

    
    

    1. 

       Detach the claw and disconnect the fuel lid lock open lever sub-assembly.

    2. 

       Disconnect the fuel filler opening lid lock sub-assembly and remove the fuel lid lock open lever sub-assembly.

26. REMOVE FUEL FILLER OPENING LID LOCK SUB-ASSEMBLY

    
    

    1. Partially remove the floor carpet.

       Tech Tips

       It is not necessary to fully remove the floor carpet. Partially remove it so that the fuel filler opening lid lock sub-assembly can be removed.

    2. 

       	Remove in this Direction (1)
       	Remove in this Direction (2)

       Disconnect the fuel filler oepning lid lock sub-assembly as shown in the illustration.

    3. Detach the clamp and remove the fuel filler opening lid lock sub-assembly.

       

       *1

       Fuel Filler Opening Lid Lock Sub-assembly

       -

       -

27. REMOVE FUEL FILLER OPENING LID LOCK RETAINER

    
    

    1. 

       	Remove in this Direction (1)
       	Remove in this Direction (2)

       Remove the fuel filler opening lid lock retainer as shown in the illustration.