FUEL LID LOCK CONTROL CABLE ASSEMBLY(for LHD) REMOVAL

PROCEDURE


  1. REMOVE REAR NO. 2 SEAT ASSEMBLY LH

    Click here

  2. REMOVE COWL SIDE TRIM BOARD LH

    Click here

  3. REMOVE DOOR SCUFF PLATE ASSEMBLY LH

    Click here

  4. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  5. REMOVE ASSIST GRIP PLUG

    Click here

  6. REMOVE ASSIST GRIP PLUG

    Click here

  7. REMOVE NO. 2 ASSIST GRIP

    Click here

  8. REMOVE OUTER LAP BELT ANCHOR COVER

    Click here

  9. REMOVE LOWER CENTER PILLAR GARNISH LH

    Click here

  10. REMOVE REAR NO. 1 FLOOR BOARD ASSEMBLY

    Click here

  11. REMOVE REAR NO. 2 FLOOR BOARD ASSEMBLY

    Click here

  12. REMOVE REAR NO. 3 FLOOR BOARD ASSEMBLY

    Click here

  13. REMOVE UTILITY BOX SUB-ASSEMBLY

    Click here

  14. REMOVE BACK DOOR STRIKER COVER

    Click here

  15. REMOVE BACK DOOR SCUFF PLATE

    Click here

  16. REMOVE REAR UPPER NO. 2 FLOOR BOARD PLATE

    Click here

  17. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  18. REMOVE ROPE HOOK ASSEMBLY

    Click here

  19. REMOVE DECK SIDE GARNISH LH

    Click here

  20. REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH

    Click here

  21. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  22. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. B006RGZ

      Detach the claw and disconnect the fuel lid lock open lever sub-assembly.

    2. B006KJ1

      Disconnect the fuel filler opening lid lock sub-assembly and remove the fuel lid lock open lever sub-assembly.

  23. REMOVE FUEL FILLER OPENING LID LOCK SUB-ASSEMBLY


    1. Partially remove the floor carpet.

      Tech Tips

      It is not necessary to fully remove the floor carpet. Partially remove it so that the fuel filler opening lid lock sub-assembly can be removed.

    2. B006R95C02
      B006N8A Remove in this Direction (1)
      B006NJK Remove in this Direction (2)

      Disconnect the fuel filler oepning lid lock sub-assembly as shown in the illustration.

    3. Detach the clamp and remove the fuel filler opening lid lock sub-assembly.

      B006P83C01
      *1 Fuel Filler Opening Lid Lock Sub-assembly - -

  24. REMOVE FUEL FILLER OPENING LID LOCK RETAINER


    1. B006NVYC01
      B006N8A Remove in this Direction (1)
      B006NJK Remove in this Direction (2)

      Remove the fuel filler opening lid lock retainer as shown in the illustration.