BACK DOOR SUPPORT DISPOSAL

PROCEDURE


  1. DISPOSE OF BACK DOOR STAY ASSEMBLY LH


    1. A01IFW1N02

      Secure the back door stay assembly horizontally in a vise with the piston rod pulled out.

    2. Wearing protective glasses, gradually cut the shaded part between A and B, shown in the illustration, using a metal saw to gradually release the gas.

      Specification
      Area Measurement
      A-B 170 mm (6.693 in.)
      C-D 100 mm (3.937 in.)
      E-F 230 mm (9.055 in.)

      Note

      Although the gas inside the back door stay assembly is colorless, odorless and harmless, metal debris may scatter. Therefore, cover the back door stay assembly with a piece of cloth or other material.