BACK DOOR MOTOR UNIT INSTALLATION

PROCEDURE

1. INSTALL BACK DOOR MOTOR UNIT

   
   

   1. 

      	Bolt
      	Connector

      Attach the hook to temporarily install the back door motor unit.

   2. Install the back door motor unit with the 4 bolts.

      Torque:

      13.7 N*m  { 140 kgf*cm, 10 ft.*lbf }

   3. Connect the connector.

2. INSTALL INNER UPPER ROOF SIDE GARNISH LH

   Click here

3. CONNECT POWER BACK DOOR ROD

   Click here

4. INSTALL BACK DOOR SIDE GARNISH LH

   Click here

5. INSTALL BACK DOOR SERVICE HOLE COVER LH

   Click here

6. INSTALL CENTER BACK DOOR GARNISH

   Click here

7. INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH

   Click here

8. INSTALL DECK SIDE GARNISH LH

   Click here

9. INSTALL ROPE HOOK ASSEMBLY

   Click here

10. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

11. INSTALL REAR UPPER NO. 2 FLOOR BOARD PLATE

    Click here

12. INSTALL BACK DOOR SCUFF PLATE

    Click here

13. INSTALL BACK DOOR STRIKER COVER

    Click here

14. INSTALL UTILITY BOX SUB-ASSEMBLY

    Click here

15. INSTALL REAR NO. 3 FLOOR BOARD ASSEMBLY

    Click here

16. INSTALL REAR NO. 2 FLOOR BOARD ASSEMBLY

    Click here

17. INSTALL REAR NO. 1 FLOOR BOARD ASSEMBLY

    Click here

18. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

19. INSTALL REAR NO. 2 SEAT ASSEMBLY LH

    Click here