POWER BACK DOOR CONTROL SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR CONTROL SWITCH


    1. A01IKZTC02
      *a

      Component without harness connected

      (Back Door Control Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      3 (CLS) - 4 (GND) Switch off 10 kΩ or higher
      Switch on Below 1 Ω

      If the result is not as specified, replace the back door control switch.