POWER SLIDE DOOR TOUCH SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL POWER SLIDE DOOR SENSOR ASSEMBLY LH


    1. B006PCTC02
      B006PCE Double-sided Tape

      Attach the clip and claw to install a new power slide door sensor assembly LH.

    2. Remove the peeling paper from double-sided tape and press the double-sided tape to the side of the door panel.

    3. Connect the connector.

  2. INSTALL SLIDE DOOR PANEL COVER SUB-ASSEMBLY LH

    Click here

  3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  4. CONNECT NO. 3 SLIDE DOOR WEATHERSTRIP LH

    Click here