POWER SLIDE DOOR TOUCH SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. DISCONNECT NO. 3 SLIDE DOOR WEATHERSTRIP LH

    Click here

  2. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  3. REMOVE SLIDE DOOR PANEL COVER SUB-ASSEMBLY LH

    Click here

  4. REMOVE POWER SLIDE DOOR SENSOR ASSEMBLY LH


    1. B006PCTC01
      B006PCE Double-sided Tape

      Disconnect the connector.

    2. Detach the clip and claw.

    3. Remove the double-sided tape and power slide door sensor assembly LH.

      Note

      Remove any remaining double-sided tape from the slide door panel LH.