POWER SLIDE DOOR CONTROL SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR DOOR OUTSIDE HANDLE COVER LH


    1. B006PFHC04
      *1 Hole Plug
      B006N8A Install in this Direction

      Attach the claw to install the rear door outside handle cover LH as shown in the illustration.

    2. Using a T30 "TORX" socket wrench, install the screw.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    3. Install the hole plug.

    4. B006P9Y

      Connect the connector.

  2. INSTALL SLIDE DOOR PANEL COVER SUB-ASSEMBLY LH

    Click here

  3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  4. CONNECT NO. 3 SLIDE DOOR WEATHERSTRIP LH


    1. B006PHV

      Attach the clip to connect the No. 3 slide door weatherstrip LH.