POWER SLIDE DOOR CONTROL SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. DISCONNECT NO. 3 SLIDE DOOR WEATHERSTRIP LH


    1. B006PHV

      Detach the clip and disconnect the No. 3 slide door weatherstrip LH.

  2. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  3. REMOVE SLIDE DOOR PANEL COVER SUB-ASSEMBLY LH

    Click here

  4. REMOVE REAR DOOR OUTSIDE HANDLE COVER LH


    1. B006P9Y

      Disconnect the connector.

    2. B006PFHC02
      *1 Hole Plug
      B006N8A Remove in this Direction

      Remove the hole plug.

    3. Using a T30 "TORX" socket wrench, loosen the screw.

    4. Detach the claw and remove the rear door outside handle cover LH as shown in the illustration.