POWER SLIDE DOOR MAIN SWITCH INSPECTION

PROCEDURE


  1. INSPECT POWER SLIDE DOOR MAIN SWITCH


    1. A01IH5ZC02
      *a

      Component without harness connected

      (Power Slide Door Main Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      3(E) - 6(MSW) Switch on Below 1 Ω
      3(E) - 6(MSW) Switch off 10 kΩ or higher

      If the result is not as specified, replace the power slide door main switch.