SLIDE DOOR HALF OPEN STOPPER CONTROL ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT SLIDE DOOR HALF OPEN STOPPER CONTROL ASSEMBLY


    1. A01IHJOC03
      *1 Shaft
      *a

      Component without harness connected

      (Slide Door Half Open Stopper Control Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Shaft is not pressed 10 kΩ or higher
      1 - 2 Shaft is pressed Below 1 Ω

      If the result is not as specified, replace the slide door half open stopper control assembly.