BACK DOOR REASSEMBLY

PROCEDURE


  1. INSTALL BACK DOOR GARNISH COVER (w/o Panoramic View Monitor System)


    1. Install the back door garnish cover with the 2 bolts.

  2. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)

    Click here

  3. INSTALL REAR LIGHT ASSEMBLY LH (for ALPHARD)

    Click here

  4. INSTALL REAR LIGHT ASSEMBLY RH (for ALPHARD)

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL REAR LIGHT ASSEMBLY LH (for VELLFIRE)

    Click here

  6. INSTALL REAR LIGHT ASSEMBLY RH (for VELLFIRE)

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL LICENSE PLATE LIGHT ASSEMBLY

    Click here

  8. INSTALL BACK DOOR WEIGHT (for 2AR-FE)


    1. B006PF4

      Attach the guide to install the back door weight with the 3 bolts.

  9. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

    Click here

  10. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. for ALPHARD:

      Click here

    2. for VELLFIRE:

      Click here

  11. INSTALL REAR WIPER MOTOR ASSEMBLY

    Click here

  12. INSTALL REAR WIPER MOTOR GROMMET

    Click here

  13. INSTALL NO. 1 REAR SPOILER COVER

    Click here

  14. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY

    Click here

  15. INSTALL REAR SPOILER SEAL

    Click here

  16. INSTALL REAR SPOILER

    Click here

  17. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (w/ Back Door Speaker)

    Click here

  18. INSTALL BACK DOOR PANEL CUSHION

    Tech Tips

    Use the same procedure for both back door panel cushions.


    1. B006LID

      Attach the claw to install a new back door panel cushion.

  19. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

    Click here

  20. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)

    Tech Tips

    Use the same procedure described for the LH side.

  21. INSTALL BACK DOOR SIDE MALE STOPPER LH


    1. B006MNU

      Install the back door side male stopper LH with the 2 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

  22. INSTALL BACK DOOR SIDE MALE STOPPER RH

    Tech Tips

    Use the same procedure described for the LH side.

  23. CONNECT POWER BACK DOOR ROD (w/ Power Back Door)


    1. B006LGB

      Connect the power back door rod with the 2 bolts.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

  24. INSTALL BACK DOOR LOCK ASSEMBLY

    Click here

  25. INSTALL BACK DOOR TRIM BOARD ASSEMBLY


    1. B006P3A

      Detach the guide, clip to install the back door trim board assembly.

    2. B006PPVC01
      B006PCE Protective Tape

      Attach the claw to install the back door service hole cover.

      Tech Tips

      Use the same procedure described for other side.

    3. B006PXF

      Install the 2 clips.

    4. Remove each protective tape.

  26. INSTALL SWITCH BEZEL (w/ Power Back Door)


    1. B006N3N

      Attach the claw to install the switch bezel.

  27. INSTALL BACK DOOR INSIDE HANDLE


    1. B006O58

      Attach the claw to install the back door inside handle.

  28. INSTALL BACK DOOR SIDE GARNISH LH (w/ Power Back Door)


    1. B006N2ZC01
      B006Q1Z Place Hands Here
      B006N8A Install in this Direction (1)
      B006NJK Install in this Direction (2)

      Attach the guide and claw as shown in the illustration.

    2. B006P90C01
      B006N8A Install in this Direction

      Attach the clip to install the back door side garnish LH.

  29. INSTALL BACK DOOR SIDE GARNISH LH (w/o Power Back Door)


    1. B006N2ZC01
      B006Q1Z Place Hands Here
      B006N8A Install in this Direction (1)
      B006NJK Install in this Direction (2)

      Attach the guide and claw as shown in the illustration.

    2. B006ORUC02
      B006N8A Install in this Direction

      Attach the clip to install the back door side garnish LH.

  30. INSTALL BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door)


    1. B006LBRC01
      B006N8A Install in this Direction

      Attach the claw to install the back door service hole cover LH.

  31. INSTALL BACK DOOR SIDE GARNISH RH


    1. B006RIMC01
      B006Q1Z Place Hands Here
      B006N8A Install in this Direction (1)
      B006NJK Install in this Direction (2)

      Attach the guide and claw as shown in the illustration.

    2. B006KQJC01
      B006N8A Install in this Direction

      Attach the clip to install the back door side garnish RH.

  32. INSTALL CENTER BACK DOOR GARNISH


    1. B006MJ1

      Attach the claw and clip to install the center back door garnish.