TILT ROOF HOUSING DISASSEMBLY

PROCEDURE


  1. REMOVE TILT ROOF LINK SUB-ASSEMBLY RH


    1. A01IHPL

      Remove the 2 nuts and tilt roof link sub-assembly RH.

  2. REMOVE TILT ROOF LINK SUB-ASSEMBLY LH

    Tech Tips

    Use the same procedure described for the RH side.

  3. REMOVE SUNSHADE TRIM SUB-ASSEMBLY


    1. A01IKBE

      Remove the 2 screws and tilt roof housing panel.

    2. A01IF8RC01
      B006N8A Remove in this Direction

      Slide and remove the sunshade trim sub-assembly as shown in the illustration.