SLIDING ROOF SYSTEM DESCRIPTION
The sliding roof system controls the sliding roof operation using the sliding roof drive gear assembly (sliding roof ECU). Operating the map light assembly (slide roof switch) and integration control and panel assembly (slide roof switch) results in electrical power being transmitted to the sliding roof drive gear assembly (sliding roof ECU).
FUNCTION OF MAIN COMPONENT
The sliding roof system consists of the following components:
| Component | Outline |
|---|---|
| Sliding roof drive gear assembly (sliding roof ECU) | The sliding roof drive gear assembly (sliding roof ECU) controls the rotational direction of the motor, which slides the sliding roof glass. |
| Map light assembly (slide roof switch) | The map light assembly (slide roof switch) outputs operation signals to the sliding roof drive gear assembly (sliding roof ECU). |
| Integration control and panel assembly (slide roof switch) | The integration control and panel assembly (slide roof switch) outputs operation signals to the sliding roof drive gear assembly (sliding roof ECU). |
SYSTEM FUNCTION
The sliding roof system has the following functions:
| Function | Outline |
|---|---|
| Manual slide open and close function | This function causes the sliding roof to open (or close) when the OPEN switch (or CLOSE switch) is pressed for a maximum of 0.3 seconds. The sliding roof stops as soon as the switch is released. |
| Auto slide open function | This function causes the sliding roof to reach the comfort stop position or fully open when the OPEN switch is pressed for a minimum of 0.3 seconds. |
| Auto slide close function | This function causes the sliding roof to fully close when the CLOSE switch is pressed for a minimum of 0.4 seconds. |
| Jam protection function | The jam protection function automatically stops the sliding roof and moves it open halfway if foreign matter gets jammed in the sliding roof during close operation. |
| Key-off operation function | The key-off operation function makes it possible to operate the sliding roof for approximately 43 seconds after the engine switch is turned from on (IG) to off, if the front doors are not opened. |
| Key-linked function* |
Tech Tips This function is linked with the power window key-linked function. |
| Wireless transmitter-linked function* |
Tech Tips This function is linked with the power window wireless transmitter-linked function. |
| Sliding roof open warning function | When the engine switch is turned from on (IG) to off and the driver door is opened with the sliding roof open, the buzzer in the combination meter assembly sounds once. Then, a warning message appears on the multi-information display. |
*: This function is set through the customize function, as it is off by default.