FRONT CONSOLE BOX(for Integrated Type) REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY


    1. A01IJBB

      Install the console cup holder box sub-assembly with the 4 screws.

  2. INSTALL BOX BOTTOM MAT


    1. A01IJIJ

      Install the box bottom mat.

  3. INSTALL TRASH BOX ASSEMBLY


    1. A01IGN6C03
      *a Hinge

      Attach the hinge.

    2. Press the parts labeled A in the illustration in the direction indicated by the arrows and attach the stoppers to install the trash box assembly.

    3. Connect the damper.

  4. INSTALL REAR CONSOLE END PANEL GARNISH


    1. A01IHMF

      Attach the claw to install the rear console end panel garnish.

  5. INSTALL CONSOLE BOX POCKET SUB-ASSEMBLY


    1. A01IHA9

      Install the console box pocket sub-assembly with the 6 screws.

  6. INSTALL REAR CONSOLE BOX GARNISH


    1. A01IJB2

      Attach the claw to install the rear console box garnish.

    2. Install the 4 screws.

  7. INSTALL CONSOLE BOX WIRE


    1. A01IGJ9

      Attach the clamp to install the console box wire.

  8. INSTALL NO. 1 STEREO COMPONENT WIRE


    1. A01IF8K

      Attach the clamp to install the No. 1 stereo component wire.

  9. INSTALL EQUIPMENT SET PANEL


    1. A01IK0H

      Attach the claw, clip and guide to install the equipment set panel.

  10. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH


    1. A01IL72

      Attach the claw to install the upper No. 2 console panel garnish.

  11. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH


    1. A01IJUM

      Attach the claw to install the upper No. 1 console panel garnish.

  12. INSTALL NO. 2 BOX PANEL


    1. Attach the claw to install the No. 2 box panel.

      A01IGPT

  13. INSTALL NO. 1 BOX PANEL


    1. Attach the claw to install the No. 1 box panel.

      A01IIVR
    2. A01IJBZ

      Attach the claw to install the retainer.

    3. Attach the clamp.

    4. A01IFNE

      Attach the claw and guide to install the bracket.

    5. A01IEXO

      Attach the claw to install the panel.

  14. INSTALL CONSOLE BOX HOLE COVER


    1. A01IEOT

      Attach the claw and guide to install the console box hole cover.

  15. INSTALL REAR CONSOLE ARMREST ASSEMBLY


    1. Temporarily set the rear console armrest assembly to the console box.

    2. A01IIUMC01
      B006N8A Installation Direction

      Open the armrest on the driver seat side and install the console compartment door male hinge.

    3. A01IKMRC01
      B006N8A Installation Direction

      Open the armrest on the passenger seat side and install the console compartment door male hinge to install the rear console armrest assembly.