FRONT CONSOLE BOX(for Integrated Type) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL CONSOLE BOX ASSEMBLY


    1. Attach the claw and guide to install the console box assembly as shown in the illustration.

    2. Connect the connector.

    3. Install the 4 bolts.

      B006NQ0C01
      *a Connector *b Bolt
      B006N8A Install in this Direction - -

  2. INSTALL CONSOLE BOX CARPET


    1. B006ODG

      Install the console box carpet.

  3. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY

    B006MHEC04
    *A w/ Clip
    B006N8A Install in this Direction

    1. Connect the connector.

    2. Attach the claw to install the rear console end panel sub-assembly as shown in the illustration.

    3. w/ Clip:


      1. Install the 2 clips.

  4. INSTALL REAR NO. 2 CONSOLE END PANEL GARNISH


    1. B006KOKC01
      B006N8A Install in this Direction

      Attach the claw to install the rear No. 2 console end panel garnish as shown in the illustration.

  5. INSTALL CENTER FLOOR CARPET COVER LH


    1. B006N8GC01
      B006N8A Install in this Direction

      Attach the guide as shown in the illustration.

    2. B006Q7EC01
      B006N8A Install in this Direction

      Attach the claw to install the center floor carpet cover LH as shown in the illustration.

  6. INSTALL CENTER FLOOR CARPET COVER RH


    1. B006LIIC01
      B006N8A Install in this Direction

      Attach the guide as shown in the illustration.

    2. B006QIYC01
      B006N8A Install in this Direction

      Attach the claw to install the center floor carpet cover RH as shown in the illustration.

  7. INSTALL FRONT NO. 2 CONSOLE BOX INSERT


    1. B006PSEC01
      B006N8A Install in this Direction

      w/o Seat Heater System:


      1. Attach the claw to install the front No. 2 console box insert as shown in the illustration.

    2. B006PZ4C01
      B006N8A Install in this Direction

      w/ Seat Heater System:


      1. Connect the connector.

      2. Attach the claw to install the front No. 2 console box insert as shown in the illustration.

  8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. B006MHMC01
      B006N8A Install in this Direction

      Attach the guide as shown in the illustration.

    2. B006OU0C01
      B006N8A Install in this Direction

      Attach the claw to install the upper console panel sub-assembly as shown in the illustration.

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. B006NSXC01
      B006N8A Install in this Direction

      Attach the claw and clip to install the instrument panel finish panel end LH as shown in the illustration.

  10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. B006NJWC01
      B006N8A Install in this Direction

      Attach the claw and clip to install the instrument panel finish panel end RH as shown in the illustration.

  11. INSTALL NO. 2 BOX BOTTOM MAT


    1. B006RGT

      w/o Seat Heater System:

      Install the No. 2 box bottom mat.

    2. B006LHM

      w/ Seat Heater System:

      Install the No. 2 box bottom mat.