FRONT CONSOLE BOX(for Integrated Type) DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE REAR CONSOLE ARMREST ASSEMBLY


    1. Open the rear console armrest assembly on the driver seat side.

    2. A01IFXZC02
      *a Protective Tape
      *b Console Compartment Door Male Hinge
      B006N8A Removal Direction

      Using a screwdriver, push out the console compartment door male hinge, and then close the armrest.

      Tech Tips

      Tape the screwdriver tip before use.

    3. Open the rear console armrest assembly on the passenger seat side.

    4. A01IHHYC02
      *a Protective Tape
      *b Console Compartment Door Male Hinge
      B006N8A Removal Direction

      Using a screwdriver, push out the console compartment door male hinge, and then close the armrest.

      Tech Tips

      Tape the screwdriver tip before use.

    5. A01IJ3SC02
      *a Protective Tape

      Using a screwdriver, detach the claw and remove the rear console armrest assembly.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE CONSOLE BOX HOLE COVER


    1. A01IEOT

      Detach the claw and guide and remove the console box hole cover.

  3. REMOVE NO. 2 BOX PANEL


    1. A01IEXO

      Detach the claw and remove the panel.

    2. A01IFNE

      Detach the claw and guide and remove the bracket.

    3. A01IJBZ

      Detach the clamp.

    4. Detach the claw and remove the retainer.

    5. Detach the claw and remove the No. 2 box panel.

      A01IGPT

  4. REMOVE NO. 1 BOX PANEL


    1. Detach the claw and remove the No. 1 box panel.

      A01IIVR

  5. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH


    1. A01IL72

      Detach the claw and remove the upper No. 2 console panel garnish.

  6. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH


    1. A01IJUM

      Detach the claw and remove the upper No. 1 console panel garnish.

  7. REMOVE EQUIPMENT SET PANEL


    1. A01IK0H

      Detach the claw, clip and guide and remove the equipment set panel.

  8. REMOVE CONSOLE BOX WIRE


    1. A01IGJ9

      Detach the clamp and remove the console box wire.

  9. REMOVE NO. 1 STEREO COMPONENT WIRE


    1. A01IF8K

      Detach the clamp and remove the No. 1 stereo component wire.

  10. REMOVE REAR CONSOLE BOX GARNISH


    1. A01IJB2

      Remove the 4 screws.

    2. Detach the claw and remove the rear console box garnish.

  11. REMOVE CONSOLE BOX POCKET SUB-ASSEMBLY


    1. A01IHA9

      Remove the 6 screws and console box pocket sub-assembly.

  12. REMOVE REAR CONSOLE END PANEL GARNISH


    1. A01IHMF

      Detach the claw and remove the rear console end panel garnish.

  13. REMOVE TRASH BOX ASSEMBLY


    1. Disconnect the damper.

    2. A01IGN6C02
      *a Hinge

      Press the parts labeled A in the illustration in the direction indicated by the arrows to release the stoppers.

    3. Detach the hinge and remove the trash box assembly.

  14. REMOVE BOX BOTTOM MAT


    1. A01IJIJ

      Remove the box bottom mat.

  15. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY


    1. A01IJBB

      Remove the 4 screws and console cup holder box sub-assembly.