FRONT CONSOLE BOX(for Separate Type) REMOVAL

PROCEDURE


  1. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY


    1. Put protective tape around the rear console end panel sub-assembly.

    2. Place your hand at the position shown in the illustration and pull in the direction indicated by the arrow to create a gap.

      A01IHL9C01
      *a Protective Tape - -
      B006Q1Z Place Hand Here B006N8A Remove in this Direction

    3. Place your hand in the gap created during the above procedure and pull in the direction indicated by the arrows shown in the illustration to detach the claw.

      A01IJ4JC01
      B006Q1Z Place Hand Here B006N8A Remove in this Direction

    4. Place your hand in the gap created during the above procedures and pull in the direction indicated by the arrows shown in the illustration to detach the claw and remove the rear console end panel sub-assembly.

      A01IEKMC01
      B006N8A Remove in this Direction B006QOD Order of Removal

  2. REMOVE CONSOLE BOX ASSEMBLY


    1. A01IG1R

      Remove the 2 bolts.

    2. Disconnect the connector.

    3. A01IJ02C01
      B006N8A Console Box Assembly Slide Direction

      Slide the console box assembly in the direction indicated by the arrow shown in the illustration to detach the guide and remove the console box assembly.