CIGARETTE LIGHTER INSTALLATION

PROCEDURE

1. INSTALL CIGARETTE LIGHTER ASSEMBLY

   
   

   1. Temporarily install the cigarette lighter socket and retainer assembly to the center lower instrument cluster finish panel sub-assembly.

   2. 

      Install in this Direction

      Turn the cigarette lighter nut as shown in the illustration to install the cigarette lighter socket and retainer assembly.

   3. Engage the 2 clamps and connect the connector.

   4. Engage the 2 claws and guide.

   5. Install the cigarette lighter knob and element assembly.

2. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

3. INSTALL COMBINATION SWITCH ASSEMBLY

   Click here

4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

5. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

   Click here

6. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Audio, w/ Navigation System)

   Click here

7. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Audio, w/o Navigation System)

   Click here

8. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY (w/ Audio)

   Click here

9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio)

   Click here

10. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL

    Click here

11. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

12. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

13. INSTALL NO. 2 BOX BOTTOM MAT

    Click here