COMPRESSOR(for 2GR-FKS) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    Do not race the engine before replacing the compressor and magnet clutch.

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  3. REMOVE FAN AND GENERATOR V BELT

    Click here

  4. REMOVE RADIATOR ASSEMBLY

    Click here

  5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. B006N2P

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor and magnet clutch.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  6. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE


    1. B006NOA

      Remove the bolt and disconnect the No. 1 cooler refrigerant suction hose from the compressor and magnet clutch.

    2. Remove the O-ring from the No. 1 cooler refrigerant suction hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  7. REMOVE COMPRESSOR AND MAGNET CLUTCH


    1. B006MRR

      Detach the clamp.

    2. Disconnect the 3 connectors.

    3. B006O0J

      Remove the bolt and wiring harness clamp bracket.

    4. B006LIPC01
      B006QOD Bolt
      B006LKF Nut

      Remove the 2 bolts, 2 nuts and wiring harness clamp bracket.

    5. B006Q1Y

      Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor and magnet clutch.

      Tech Tips

      Remove the compressor and magnet clutch from the vehicle with the stud bolt remaining in the compressor and magnet clutch.