COMPRESSOR(for 2GR-FE) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE FRONT WHEEL RH

    Click here

  3. REMOVE REAR ENGINE UNDER COVER RH

    Click here

  4. REMOVE FAN AND GENERATOR V BELT

    Click here

  5. REMOVE RADIATOR ASSEMBLY

    Click here

  6. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. B006PUE

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor and magnetic clutch.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  7. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE


    1. B006LHJ

      Remove the bolt and disconnect the No. 1 cooler refrigerant suction hose from the compressor and magnetic clutch.

    2. Remove the O-ring from the No. 1 cooler refrigerant suction hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  8. REMOVE COMPRESSOR AND MAGNET CLUTCH


    1. B006KYC

      Disconnect the 3 connectors.

    2. Detach the clamp.

    3. B006MXEC03
      *1 Bracket

      Remove the 2 bolts, 2 nuts and bracket.

    4. B006LXL

      Using an E8 "TORX" socket wrench, remove the stud bolt and compressor and magnet clutch.

      Tech Tips

      Remove the compressor and magnet clutch from the vehicle with the stud bolt remaining in the compressor and magnet clutch.