COMPRESSOR(for 2AR-FE) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE FRONT WHEEL RH

    Click here

  3. REMOVE REAR ENGINE UNDER COVER RH

    Click here

  4. REMOVE RADIATOR RESERVE TANK ASSEMBLY

    Click here

  5. REMOVE RADIATOR RESERVE TANK BRACKET

    Click here

  6. REMOVE FAN AND GENERATOR V BELT

    Click here

  7. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE


    1. B006LU8

      Remove the bolt and disconnect the No. 1 cooler refrigerant suction hose.

    2. Remove the O-ring from the No. 1 cooler refrigerant suction hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  8. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. B006O4I

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  9. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY


    1. B006QE0

      Disconnect the connector.

    2. Remove the bolt and disconnect the wire harness.

    3. B006KY2

      Remove the 2 bolts and 2 nuts.

    4. B006OZX

      Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor assembly with pulley.