PTC HEATER ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL QUICK HEATER ASSEMBLY


    1. B006KU9C01
      B006N8A Install in this Direction

      Install the quick heater assembly with the screw.

    2. Attach the clamp and connect the 2 connectors.

  2. INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY

    Click here

  3. INSTALL NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY


    1. B006MWSC03
      B006QOD Nut
      B006LKF Bolt
      B006O7D Screw

      Install the No. 1 instrument panel brace sub-assembly with the 2 screws, bolt and 2 nuts.

      Torque:
      Bolt
      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

    2. Connect each connector and attach each clamp.

  4. INSTALL NO. 2 INSTRUMENT PANEL TO FLOOR BRACE SUB-ASSEMBLY

    Click here

  5. INSTALL NO. 1 INSTRUMENT PANEL TO FLOOR BRACE SUB-ASSEMBLY

    Click here

  6. INSTALL NO. 4 AIR DUCT SUB-ASSEMBLY

    Click here

  7. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

    Click here