REAR BLOWER MOTOR REMOVAL

PROCEDURE

1. REMOVE REAR NO. 2 SEAT ASSEMBLY RH

   Click here

2. REMOVE REAR NO. 1 FLOOR BOARD ASSEMBLY

   Click here

3. REMOVE REAR NO. 2 FLOOR BOARD ASSEMBLY

   Click here

4. REMOVE REAR NO. 3 FLOOR BOARD ASSEMBLY

   Click here

5. REMOVE UTILITY BOX SUB-ASSEMBLY

   Click here

6. REMOVE REAR UPPER NO. 1 FLOOR BOARD PLATE

   Click here

7. REMOVE BACK DOOR SCUFF PLATE

   Click here

8. REMOVE REAR DOOR SCUFF PLATE RH

   Click here

9. REMOVE DECK SIDE GARNISH RH

   Click here

10. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

11. REMOVE ROPE HOOK ASSEMBLY

    Click here

12. REMOVE REAR QUARTER TRIM PANEL ASSEMBLY RH

    Click here

13. REMOVE REAR NO. 2 SEAT TRACK ASSEMBLY RH

    Click here

14. REMOVE REAR BLOWER WITH FAN MOTOR SUB-ASSEMBLY

    
    

    1. 

       Detach the clamp.

    2. Disconnect each connector.

    3. Remove the 3 screws and rear blower with fan motor sub-assembly.