ROOM TEMPERATURE SENSOR(for RHD) REMOVAL

PROCEDURE

1. REMOVE CONSOLE BOX ASSEMBLY (for Integrated Console Box Type)

   Click here

2. REMOVE CENTER NO. 2 INSTRUMENT CLUSTER FINISH PANEL (for Separate Console Box Type)

   Click here

3. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL (for Separate Console Box Type)

   Click here

4. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL

   Click here

5. REMOVE INSTRUMENT PANEL BOX ASSEMBLY (for Separate Console Box Type)

   Click here

6. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Separate Console Box Type)

   Click here

7. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

8. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

9. REMOVE INSTRUMENT PANEL FINISH PANEL ASSEMBLY

   Click here

10. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

11. REMOVE COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)

    
    

    1. 

       Detach the claw and remove the cooler thermistor (room temperature sensor).