REAR NO. 1 SEAT ASSEMBLY(for Manual Captain Seat) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

The procedure listed below is for the RH side. Use the same procedure for the RH and LH sides, unless otherwise specified.

PROCEDURE


  1. INSTALL REAR NO. 1 SEAT ASSEMBLY RH


    1. Place the rear No. 1 seat assembly RH inside the vehicle.

      Note


      • Placing the rear No. 1 seat assembly RH in the vehicle must be performed by multiple people.

      • Do not damage the rear No. 1 seat assembly RH, body exterior or vehicle interior.

    2. Temporarily install the rear No. 1 seat assembly RH with the 4 bolts.

    3. Move the rear No. 1 seat assembly RH to the frontmost seat slide position.

    4. A01UDZKN01

      Tighten the 2 bolts in the order shown in the illustration.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

    5. Move the rear No. 1 seat assembly RH to the rearmost seat slide position.

    6. Raise the ottoman.

    7. A01UETJN01

      Tighten the 2 bolts in the order shown in the illustration.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

  2. INSTALL NO. 2 REAR SEAT LEG SIDE COVER

    Tech Tips

    Use the same procedure for the other locations.


    1. A01UDLD

      Attach the claw.

    2. A01UEL3C01
      B006N8A Install in this Direction

      Attach the claw and install the No. 2 rear seat leg side cover.

  3. INSTALL NO. 3 REAR SEAT LEG SIDE COVER

    Tech Tips

    Use the same procedure for the other locations.


    1. A01UCF4

      Attach the claw.

    2. A01UCMEC01
      B006N8A Install in this Direction

      Attach the claw and install the No. 3 rear seat leg side cover.

  4. INSTALL REAR SEAT HEADREST ASSEMBLY


    1. Install the rear seat headrest assembly.